Betekenis van:
absorbent material

Voorbeeldzinnen

1. Electromagnetic absorbent material
2. Remove the blocking solution and gently tap the plates onto absorbent material.
3. Gently tap the plates onto absorbent material to remove any residual wash.
4. The use of fibrous absorbent material is permitted in the construction of silencers only if the following conditions are fulfilled:
5. the fibrous absorbent material may not be placed in those parts of the silencer through which gases pass;
6. the fibrous absorbent material must be resistant to a temperature at least 20 % higher than the operating temperature (degrees C) which may occur in the region of the silencer where those fibrous absorbent materials are situated.
7. Enough absorbent material in the secondary container to absorb the entire contents of all primary receptacles in case of leakage or damage must be used.
8. suitable devices must ensure that the fibrous absorbent material is kept in place for the whole time that the silencer is being used;
9. use of absorbent material (e.g. sand, diatomaceous earth, acid binder, universal binder, sawdust, etc.), reduction of gases/fumes with water, dilution.
10. Wash the plates five times with distilled water containing 0,01 % (v/v) Tween 20 (washing solution). Gently tap the plates onto absorbent material to remove any residual wash.
11. At least one litter tray of minimum dimension 300 × 400 mm should be provided for every two cats and should contain a suitable absorbent and non-toxic litter or substrate material that is acceptable to and used by the cats.
12. Stabilise the plate by treatment with a stabilising solution (in order to allow long term storage at 4 °C without loss of activity) and blot dry onto absorbent material.